Home Building Kits

Description

This econometric study covers the world outlook for wood ties, siding, shingles, and shakes and contract sawing of logs owned by others across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-a-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved. This study does not report actual sales data (which are simply unavailable, in a comparable or consistent manner in virtually all of the 230 countries of the world). This study gives, however, my estimates for the worldwide latent demand, or the P.I.E., for wood ties, siding, shingles, and shakes and contract sawing of logs owned by others. It also shows how the P.I.E. is divided across the world's regional and national markets. For each country, I also show my estimates of how the P.I.E. grows over time (positive or negative growth). In order to make these estimates, a multi-stage methodology was employed that is often taught in courses on international strategic planning at graduate schools of business.

Description

This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a "borderless world", cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked to investigate the market potential for various products and services across cities. The purpose of the studies is to understand the density of demand within a country and the extent to which a city might be used as a point of distribution within its region. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another. In what follows, I summarize the economic potential for the world's major cities for "wood ties, siding, shingles, and shakes and contract sawing of logs owned by others" for the year 2009. The goal of this report is to report my findings on the real economic potential, or what an economist calls the latent demand, represented by a city when defined as an area of dominant influence. The reader needs to realize that latent demand may or may not represent real sales.

Description

This report was created for global strategic planners who cannot be content with traditional methods of segmenting world markets. With the advent of a “borderless world”, cities become a more important criteria in prioritizing markets, as opposed to regions, continents, or countries. This report covers the top 2000 cities in over 200 countries. It does so by reporting the estimated market size (in terms of latent demand) for each major city of the world. It then ranks these cities and reports them in terms of their size as a percent of the country where they are located, their geographic region (e.g. Africa, Asia, Europe, Middle East, North America, Latin America), and the total world market. In performing various economic analyses for its clients, I have been occasionally asked to investigate the market potential for various products and services across cities. The purpose of the studies is to understand the density of demand within a country and the extent to which a city might be used as a point of distribution within its region. From an economic perspective, however, a city does not represent a population within rigid geographical boundaries. To an economist or strategic planner, a city represents an area of dominant influence over markets in adjacent areas. This influence varies from one industry to another, but also from one period of time to another. In what follows, I summarize the economic potential for the world's major cities for "wood ties, siding, shingles, and shakes and contract sawing of logs owned by others" for the year 2007. The goal of this report is to report my findings on the real economic potential, or what an economist calls the latent demand, represented by a city when defined as an area of dominant influence. The reader needs to realize that latent demand may or may not represent real sales. For many items, latent demand is clearly observable in sales, as in the case for food or housing items. Consider, however, the category "satellite launch vehicles". Clearly, there are no launch pads in most cities of the world. However, the core benefit of the vehicles (e.g. telecommunications, etc.) is "consumed" by residents or industries within the world's cities. Without certain cities, in other words, the market for satellite launch vehicles would be lower for the world in general. One needs to allocate, therefore, a portion of the worldwide economic demand for launch vehicles to both regions and cities. This report takes the broader definition and considers, therefore, a city as a part of the global market.

Description

This study covers the world outlook for wood ties, siding, shingles, and shakes and contract sawing of logs owned by others across more than 200 countries. For each year reported, estimates are given for the latent demand, or potential industry earnings (P.I.E.), for the country in question (in millions of U.S. dollars), the percent share the country is of the region and of the globe. These comparative benchmarks allow the reader to quickly gauge a country vis-à-vis others. Using econometric models which project fundamental economic dynamics within each country and across countries, latent demand estimates are created. This report does not discuss the specific players in the market serving the latent demand, nor specific details at the product level. The study also does not consider short-term cyclicalities that might affect realized sales. The study, therefore, is strategic in nature, taking an aggregate and long-run view, irrespective of the players or products involved.

Description

WHAT IS LATENT DEMAND AND THE P.I.E.?The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).The latent demand for wood ties, siding, shingles, and shakes and contract sawing of logs owned by others is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is i

Description

WHAT IS LATENT DEMAND AND THE P.I.E.?The concept of latent demand is rather subtle. The term latent typically refers to something that is dormant, not observable, or not yet realized. Demand is the notion of an economic quantity that a target population or market requires under different assumptions of price, quality, and distribution, among other factors. Latent demand, therefore, is commonly defined by economists as the industry earnings of a market when that market becomes accessible and attractive to serve by competing firms. It is a measure, therefore, of potential industry earnings (P.I.E.) or total revenues (not profit) if a market is served in an efficient manner. It is typically expressed as the total revenues potentially extracted by firms. The “market” is defined at a given level in the value chain. There can be latent demand at the retail level, at the wholesale level, the manufacturing level, and the raw materials level (the P.I.E. of higher levels of the value chain being always smaller than the P.I.E. of levels at lower levels of the same value chain, assuming all levels maintain minimum profitability).The latent demand for wood ties, siding, shingles, and shakes and contract sawing of logs owned by others is not actual or historic sales. Nor is latent demand future sales. In fact, latent demand can be lower either lower or higher than actual sales if a market is inefficient (i.e., not representative of relatively competitive levels). Inefficiencies arise from a number of factors, including the lack of international openness, cultural barriers to consumption, regulations, and cartel-like behavior on the part of firms. In general, however, latent demand is typically larger than actual sales in a country market.For reasons discussed later, this report does not consider the notion of “unit quantities”, only total latent revenues (i.e., a calculation of price times quantity is never made, though one is i

Description

The Complete Guide to Roofing & Siding provides everything the homeowner needs to know to maintain, repair, and install all types of roofing and siding. Siding materials covered include traditional wood lap siding, brick, concrete block, stucco and fiber cement, stone veneer, wood shakes, shingles, vinyl and aluminum siding. Roofing materials covered include asphalt and fiberglass shingles, metal raised seam roofing, tile and clay roofs, slate, cedar shakes and shingles, and flat membrane roofs. Unique among books of this type, this volume also includes a complete section on exterior painting and staining techniques, including the use of scaffolds, airless paint sprayers, and other rental equipment. The book is organized with major sections on maintenance, installation, repair, and painting and staining. Within these sections, individual chapters present in-depth information on working with each roofing and siding material. The chapters on painting and staining offer a unique do-it-yourself presentation of decorating the exterior of your home, with complete information on how to plan color schemes and accessories. The chapters on roofing and siding feature easy-to-follow directions for installing the materials of your choice. The Complete Guide to Roofing & Siding is an ultimate reference source for homeowners who take pride in the integrity and appearance of their home.

Description

Authors David and Jeannie Stiles give readers all the information they need to build their own cabins -- whether it be as a wilderness retreat or a backyard studio. The authors describe each step in the process from buying land to obtaining services, from finding qualified construction help to deciding on and developing plans for a structure that suits their lifestyle and budget. "Cabins" is packed with detailed illustrations, plans and common-sense advice. Chapters include classic construction methods: how to build a log cabin, pole-built and stick-built cabin, post-and-beam, stone, cordwood and kit cabins. Construction methods are clearly illustrated in photographs and drawings and the advantages of each are explained in detail. Foundations, windows, doors, insulation, roofing, installing utilities, water and sanitary systems and heating are all discussed. Many designs are presented as inspiration and to help readers select the cabin that is perfect for them: homesteader log cabin, writing cabin, guest cabin, Japanese moon-gazing cabin, lakeside retreat, pyramid and A-frame, and hillside Mediterranean cabin. The authors include personal reminiscences from successful builders and cabin owners, and discuss furnishings and accessories that can help readers get the most enjoyment out of their newly built wilderness retreat.

Features

• ISBN13: 9781552093733
• Condition: New
• Notes: BRAND NEW FROM PUBLISHER! BUY WITH CONFIDENCE, Over one million books sold! 98% Positive feedback. Compare our books, prices and service to the competition. 100% Satisfaction Guaranteed

Description

Best-selling author and log home expert Robbin Obomsawin features the rustic and charming architecture of the Adirondack great camps of the Northeast in her newest book. Established during the early twentieth century by wealthy rail and oil barons such as the Vanderbilts and the Rockefellers, the Adirondack camps served as the preeminent playground for those who wanted to escape industrial city life and reconnect with nature. Today, these classic camps represent the best of rustic style. Beautiful interior and outdoor photography illustrate the landscape and camps, while Obomsawin's insightful text offers a history of Adirondack style and shows how it is interpreted into the great camps of today. Adirondack Cabins is ideal for builders, design professionals, and those who dream of building a mountain retreat of their own that reflects the unique style and feel of the region. Robbin Obomsawin is the construction manager and general contractor for Beaver Creek Log Homes. She combines more than twenty years of log-joinery experience with her knowledge of conventional construction methods, and has served as vice president of the International Log Builder's Association for Handcrafters. She is the author of Small Log Homes, Log Cabin Classics, and The Arts & Crafts Cabin. She resides in upstate New York. Nancie Battaglia, a freelance photographer, lives in Lake Placid, New York, and has been documenting Adirondack lifestyle, scenes, themes and sporting activities for more than twenty-five years. Her photography has been seen in publications such as Sports Illustrated, Ski, Newsweek, Boys Life, Outside, National Geographic Adventure, Adirondack Life, the New York Times, as well as in books and promotional materials for the Adirondack region.

Description

Barns, sheds, garages, and storage buildings all age as houses do. And, like houses, they will eventually need renovation to save them from disrepair and to restore them to their former glory. And they can even be converted into spaces that are once again useful to their owners, including a storage area, a studio, or a home office. Readers will learn to save money, history, and architecture simply by renovating and restoring rather than by replacing their old outbuildings. From the foundation up, from the walls in, and from the roof down, craftsman Nick Engler, author of dozens of books and hundreds of magazine articles on woodworking, construction, and home how-to, takes readers through the process of renovating existing outbuildings. Engler gives seasoned advice on how to square and strengthen the structure, repair or replace the roofing and siding, enlarge and modify the building, install new doors and windows, and add electricity and plumbing. He also includes practical information on how to evaluate an old structure in light of current building codes and how to then preserve the original charm of any outbuilding while making it usable again.